Image 1 of 10
Image 2 of 10
Image 3 of 10
Image 4 of 10
Image 5 of 10
Image 6 of 10
Image 7 of 10
Image 8 of 10
Image 9 of 10
Image 10 of 10
DIMENSIONSPlease note, pricing outlined below is reflective of a single table with a waterfall end and single steel leg. If you prefer a 2-piece version of this design, as pictured in the example images above, please inquire for pricing as we use a particular domino-connector to accommodate an attached design.
SMALL | up to 54"L x 18" - 24"W x 29.5"H | starting at $1490
SMALL WIDE | up to 54"L x 26" - 32"W x 29.5"H | starting at $1690
SML/MED | up to 60"L x 18" - 24"W x 29.5"H | starting at $1790
SML/MED WIDE | up to 60"L x 26" - 32"W x 29.5"H | starting at $1990
MEDIUM | up to 72"L x 18" - 24"W x 29.5"H | starting at $2190
MEDIUM WIDE | up to 72"L x 26" - 32"W x 29.5"H | starting at $2390
MED/LRG | up to 84"L x 18" - 24"W x 29.5”H | starting at $2690
MED/LRG WIDE | up to 84”L x 26" - 32"W x 29.5”H | starting at $2890
LARGE | up to 96"L x 18" - 24"W x 29.5”H | starting at $2990
LRG WIDE | up to 96”L x 26" - 32"W x 29.5”H | starting at $3190
LRG/XL | up to 108"L x 18" - 24"W x 29.5”H | starting at $3490
LRG/XL WIDE | up to 108"L x 26" - 32"W x 29.5”H | starting at $3690This design can also be modified to counter-height or bar-height, please inquire for pricing.
Pricing above reflects the cost for the use of “common” grade dimensional walnut, which is a more “rustic” looking grade of material with characteristics that include knots, slight traces of sapwood and color variation, and overall more wild in character and grain pattern. Some of the pieces shown in the listing example images were made using “prime” grade dimensional walnut, which is a higher grade of FSC-certified lumber sourced from the heartwood of the tree with characteristics that include few knots, minimal sapwood or color variation, and mild/mellow grain patterns. The prime grade material is more expensive for us to source than common grade material. Added costs are reflected below per size/material.
SMALL - SML/MED | upgrade to “prime” walnut | add +$450
MEDIUM - MED/LRG | upgrade to “prime” walnut | add +$550
LARGE - XLARGE | upgrade to “prime” walnut | add +$750
Other materials are also available. Please use button link to review other materials options (pricing may vary).
ECO-FRIENDLY HARDWAX OIL FINISH | Our preferred finishing method and product, made from environmentally-friendly components for eco-conscious customers. Osmo Polyx Oil is derived from natural plant oils and waxes, providing a hard-wearing and protective surface that is resistant to common liquid spills. The finish maintains the natural look and feel of the wood, all while offering protection and durability. One major advantage of hardwax oil is that it’s incredibly easy to repair/maintain, and in the event that minor signs of use occur the finish can be spot repaired with no overlap marks. With Osmo's maintenance liquid wax cleaner it's simple and quick to bring the finish "back to life" (products can be found here: Osmo Liquid Wax Cleaner and here: Osmo Hardwax Oil Finish). To avoid minor signs of use, we recommend using coasters under serveware containing hot or cold liquids as well as cleaning up spills so as to not leave any moisture to set in over long periods that can cause spots or rings to occur to maintain the condition of the wood. We are ever-committed to reducing the amount of VOC (Volatile Organic Compounds) we emit during our production process for environmentally conscious reasons, and are also trying to reduce the amount of toxins that our crew is exposed to for health safety precautions. Additionally, the hardwax-oil is a rub-on application (vs. other harsher methods such as spray-on which causes the finish to become airborne), and can be continuously DIY applied to refresh the wood on your table.
Other wood finish options are available upon request including commercial grade finishes and outdoor finishes. Please use button link to review other wood finish options (pricing may vary).
Powder-coating allows us to achieve just about any color, matte or satin sheen. Powder-coating is a free-flowing dry powder that is applied electrostatically and is then cured under heat to allow it to form a hard finish that it tougher than conventional paint. It's used mainly for coating auto parts, bike parts and outdoor furniture which require super durable and water resistant finishes.
STOCK SOLID POWDER-COAT COLOR | Stock colors include satin black or matte black, silver, or dark bronze.
COST : +$0 (stock colors included in pricing)
SPECIAL ORDER SOLID POWDER-COAT COLOR | We can also custom order a color specific for your project through Prismatic Powders (costs may vary: https://www.prismaticpowders.com/shop/powder-coating-colors)
UPGRADE COST : estimating +$15 - $25
C H O O S I N G T H E R I G H T S I Z E
For use as a dining or kitchen table, bar or conference table: If you are unsure of the exact dimensions your needs require, please consider the following basic guidelines:
Provide each guest a minimum of 24” of personal space at the dining table (chairs range from apprx. 16-20" and require space on each side to allow guests to seat comfortably).
Add an extra 12 inches of length to the table at each end for those seated at the head and foot of the table for personal legroom.
Allow for at least 36 inches between the dining table and any walls or other furniture.
Keep the table legs/base in mind, whether they may impede seating or leg room or not on the sides of the table. If the legs prohibit a person from sitting right in front of them, subtract the dimensions of the leg from the overall length of the table side to determine the available space for seating.